Post by SpiffyRumble on Feb 22, 2021 12:11:25 GMT -5
NO START ISSUE
Service light is on at the shift lever. Shifter position on the dash shows "* *" instead of "N".
Repair:
Pop open the hood and remove both L3 and N11 fuses on the driver's side firewall fuse panel. The L3 is for the TCU and the N11 is for the ECU. This will reset the modules and allow the tractor to start.
Service light is on at the shift lever. Shifter position on the dash shows "* *" instead of "N".
Repair:
Pop open the hood and remove both L3 and N11 fuses on the driver's side firewall fuse panel. The L3 is for the TCU and the N11 is for the ECU. This will reset the modules and allow the tractor to start.